Products for Transport

New content item

Continental Reduces Fuel Consumption of Commercial Vehicles by as Much as Six Liters per Hundred Kilometers

  • Innovations increase payload and reduce emissions, consumption, and operating costs
  • 12–15 kg gain in payload per axle with air springs made from glass-fiber-reinforced plastic
  • Reduction in volume of diesel oxidation catalyst by approximately 30% when placed near engine
  • CO2 emissions down by more than two metric tons per year in trucks alone with fuel-saving tires

Hanover, August 24, 2016. With its innovations for commercial vehicles, international technology company Continental can achieve fuel savings of up to six liters per 100 kilometers1. This value is a result of the systematic implementation of all the technologies available during series production and development. “We envisage great potential for future optimization in fleet consumption. Our innovations – some of which are currently in the design phase and some of which are undergoing preliminary development – offer additional potential for reducing consumption by as much as two liters per hundred kilometers,” explains Nikolai Setzer, who is a member of the Continental Executive Board. This calculation takes account of more than 20 different technologies that either have recently been implemented in series production or are currently undergoing development. Continental is thereby improving the efficiency of commercial vehicles, cutting CO2 emissions, and improving the cost efficiency of goods transportation. 

The Conti EfficientPro tires for both the steering axle and the drive axle achieve EU label grade "A," indicating the highest level of fuel efficiency, on account of their low rolling resistance.

Some of the latest solutions – including reduced-weight air springs, fuel-saving tires, and a smaller diesel oxidation catalyst – will be on show at this year’s International Motor Show Commercial Vehicles (hall 17, stand A06/B11). The company will be showcasing a diverse, technologically sophisticated, single-source portfolio to attending manufacturers, forwarding agents, and fleet managers. In addition to the latest innovations, visitors will be able to see other, more familiar Continental technology such as the eHorizon sensor system, which saves almost one liter of fuel over 100 kilometers, and the ProViu Mirror digital side mirror set, which can help save up to 0.6 liters of fuel. In 2007, the Member States of the European Union agreed to reduce primary energy consumption by 20% by 2020. Consequently, vehicle manufacturers have an interest in continuing to lower CO2 emissions.

Innovations developed by Continental – e.g. lightweight technologies and efficient exhaust-gas aftertreatment solutions – can help to meet this challenge. Fewer emissions, lower consumption, falling operating costs, increasing payloads, and stricter emissions regulations or exhaust standards such as EURO 6 are therefore constantly driving the development of innovations.

75% lighter than conventional steel pistons thanks to the use of a special plastic: for example, with the weight-reducing air spring family from Continental, forwarding agents can gain 12–15 kg of payload capacity per axle.

Lightweight plastic replaces steel and aluminum

Modern commercial vehicles and buses are subject to exacting demands when it comes to efficiency. To improve the efficiency and cost-effectiveness of goods transportation, payload capacity is to be increased in compliance with statutory limits on axle loads. Reducing the weight is not just about reducing fuel consumption and, in turn, decreasing operating costs, but also brings other advantages, too: For example, with the weight-reducing air spring family from Continental, forwarding agents can gain 12–15 kg of payload capacity per axle. With a service life of 400,000 km, CO2 emissions drop by 200 kg as a result. In comparison with conventional steel pistons, this means as much as 75% less weight thanks to the use of a special plastic. 

More compact, more efficient, more cost-effective: close-coupled exhaust aftertreatment

At the International Motor Show Commercial Vehicles, Continental will be unveiling an innovative solution for close-coupled exhaust aftertreatment on heavy-duty commercial vehicles. By positioning the diesel oxidation catalyst (DOC) near the engine, its volume can be reduced by approximately 30%. At the same time, use of the newly developed catalyst substrate in a CS design (Crossversal Structure) enables a further 20% decrease the amount of materials used and the weight of the DOC. In addition, the diminished heat loss and high conversion efficiency of the innovative CS cell structure will help to meet future nitrogen oxide emission limits, such as the CARB 2023 regulation (CARB: California Air Resources Board) in the U.S.A. Due to the higher working temperature in the DOC, the subsequent injection of urea solution can begin sooner. In addition to the DOC, the solution showcased in Hanover will include the urea metering system integrated in the tank, the SCR (Selective Catalytic Reduction) controller and the metallic catalyst substrate for 100% evaporation of the urea solution. 

EU "A" label grade: the new Conti EfficientPro fuel-saving tires 

At the commercial vehicle exhibition, Continental will be introducing its new Conti EfficientPro line of tires for the steering and drive axles. These tires, featuring optimized rolling resistance, have been developed specially for long-distance transport on freeways. 

In developing the Conti EfficientPro, Continental has built upon tried-and-tested technologies already used in the EcoPlus tire series. Thanks to special rubber compounds for the multi-ply structure of the tread and optimized rolling properties, the rolling resistance of the Conti EfficientPro has been reduced even further. Compared with the Conti EcoPlus tire, a 40-metric-ton semi-trailer truck fitted with Conti EfficientPro tires on the steering and drive axles achieves additional fuel savings of up to 0.64 liters over 100 kilometers. Over an annual distance covered of 120,000 kilometers, this equates to a reduction in CO2 emissions of more than two metric tons per year. 

The Conti EfficientPro tires for both the steering axle and the drive axle achieve EU label grade "A," indicating the highest level of fuel efficiency, on account of their low rolling resistance.

¹ Figure determined on the following basis: 350 kW truck, 40-metric-ton gross vehicle weight, Euro 6 exhaust standard, automated manual transmission on a freeway with varying elevation and road curvature at a typical speed of 85 km/h.

Press Contact Alena Bauer
Alena Bauer

Press and PR Manager

Truck Tires EMEA

Continental AG  l Tire Division

Büttnerstraße 25

30165 Hanover, Germany

+49 511 938-26199

Michael Nehring

Manager Media Relations

Commercial Vehicle Tires

Continental AG | Tire Division

Büttnerstrasse 25

30165 Hannover, Germany

+49 511 938-21813