Products for Car / Van / 4x4

“A tire always capable of mastering even the most exceptional challenges”


  • How "one of the most robust tires of all time was developed" 
  • What makes tires for electric vehicles different from their conventional counterparts
  • An interview with Anuj Jain, tire developer at Continental and responsible for the Continental CrossContact Extreme E tire

​Continental is a Founding Partner of the Extreme E race series and, from 2021, will be a Premium Sponsor. The technology company will equip all the electric racers with tires for what will be very different and ultra-tough events.

In the following interview, Continental tire development engineer Anuj Jain talks about the special challenges posed by the cars and the venues, the demanding development process under exceptional time pressure, and the technical details of what is an extraordinary tire.

Anuj Jain, tire developer at Continental

Continental: Anuj, Continental is a Founding Partner of the new Extreme E series and will be its exclusive tire supplier. You were responsible for developing the race tires. Before we go into the details, tell us how and why you became a tire developer at Continental?

Anuj Jain: With pleasure! Tire development is a fascinating field – one that has a major impact on the performance of modern-day cars. Working in this environment gives you a different view of tires. For most people, tires are round, black rubber things that rotate. But we see them as one of the greatest inventions in history and give them the respect they deserve. I joined Continental in 2017. One of the things that motivated me was the unparalleled freedom that we engineers have at Continental to dream up innovative ideas and put them into practice. This very special atmosphere motivates us to ‘go the extra mile’ – which leads to exceptional solutions. And that makes us the ideal partner for the Extreme E series.

Continental: When did you learn that you would be assuming responsibility for developing the Extreme E tires? And what were your first thoughts?

Anuj Jain: This project means a lot to me and I am very grateful for the level of trust placed in me, which is reflected not least in the timing. Normally it takes between two and three years to develop the perfect tire for a particular application with its own set of requirements. But for the exceptional requirements of Extreme E, I knew I’d have to develop the more-perfect-than-perfect tire in half the time. And it’s much more fun working against the odds, so I grabbed the opportunity with both hands. 

Continental: To date, Continental has not exactly been known for its intensive involvement in motor racing. At the same time, Extreme E is a series that is built around the custom-developed ODYSSEY 21 car. It sounds as if you had very little experience to draw on and literally had to start from scratch?

Anuj Jain: Not exactly. Although it’s not widely known in Europe, Continental has been into the off-road business for some considerable time now, not least through its involvement in the North American Speed Energy Formula Off-Road series created by off-road racer and former IndyCar and NASCAR racer Robby Gordon in 2013. For the development of the Extreme E tire, we first analyzed the maximum performance and resilience of a number of proven high-performance products before deciding to use the Continental CrossContact series as a point of reference as we took the process forward. The challenge from a technical angle was then to adapt the tread pattern, sidewall and construction to the challenging demands of the very different terrains at the Extreme E venues.


Continental: The ODYSSEY 21 is an SUV with an electric motor. To what extent did the type of motorization affect tire development, and how do these tires differ from those that would have been developed for the same vehicle if it were powered by an internal combustion engine?

Anuj Jain: Continental is the leading supplier of original equipment tires in Europe and a development partner to almost all the major automakers, so we have been working on tailor-made solutions for the special requirements of electric-powered vehicles for quite a long time. We currently have OE approvals for both Tesla and the Audi e-tron. So the magnitude of the challenge was reduced just a little. But the ODYSSEY 21 is one of a kind: Transferring 550 hp onto every kind of terrain this planet has to offer in a vehicle that tips the scales at 1.8 metric tons, is sure to push the tires to the limit. For us, the main distinction between electric drive and a conventional internal combustion engine is energy efficiency. Combustion engines typically display much lower energy efficiency than electric motors when converting the incoming energy (the chemical energy in the fuel or battery) into mechanical traction energy. The efficiency of combustion engines is limited to a theoretical maximum of around 60 percent − much lower than the typical efficiency of electric motors, where there is no theoretical limit. In short, the torque generated by the ODYSSEY 21 is going to expose the tires to exceptional forces.

Continental: Extreme E races are not held on conventional racetracks. The exceptional venues for this off-road series feature highly diverse climatic conditions and widely varying terrain: beach/coastline, rainforests, deserts, and Arctic tundra. How did you manage to create a tire that works just as safely, effectively and reliably under all these conditions – some of which are really extreme?

Anuj Jain: It was by no means a piece of cake developing an allrounder tire that can handle not only all the different terrains but the car as well in every conceivable situation. Because we’re not talking about normal driving but racing, which means it’s also about speed. In the event, we arrived at a good compromise between all the various surfaces and local requirements and the key topic of sustainability. On the one hand we needed a tire that would impress under all conditions and over all terrains and on the other we were out to create a sustainable all-rounder – a one-size-fits-all solution. Don’t forget that at the wheel of each ODYSSEY 21 there’s a dedicated professional driver with only one thing in mind: taking the car and its tires to the physical limits so as to be faster over the course than the competition. With this in mind, it was clear from the outset that as well as making the tire robust, we needed to produce the ultimate ultra-high-performance product. I was fortunate enough to be able to assemble a top team with our best engineers, designers and test drivers. Otherwise it would never have been possible to develop one of the strongest tires of all time for this unconventional purpose.

Continental: And you did so in what must have been record time…

Anuj Jain: That’s right. Time was never a friend of ours in this project. So we had to plan every step in advance. A lot of work happened in parallel. Each member of the project team had to work even harder than usual and under constant pressure. We went layer by layer, component by component to get the tire we wanted and which we believe will deliver optimum performance under the given conditions. 

Continental: Let’s talk about the outcome of your efforts: How big is the Extreme E tire? How wide is it? Why is the tread pattern the way it is? And tell us about the various subassemblies: What special technical details should we know about?

Anuj Jain: On the sidewall it says 37X12.5 R17, which means it’s 37 inches in diameter, 12.5 inches wide, and for a 17-inch wheel. The tread pattern has been optimized for top performance on every kind of terrain our planet has to offer. The tread compound was specially developed for this tire. The pattern features the ideal combination of traction ribs and pockets to get maximum traction out of any terrain. The tread blocks are reinforced with extra sub-depth elements and stone bumpers to bump out any stones that get stuck in the tread. The outcome is a tire that is robust and durable enough to cope with even such unforgiving conditions as it will encounter in the Amazon rainforest and Sahara Desert. Additionally, this tire has an all-new off-shoulder design that forms a robust interface between tread and sidewall. And as well as enhancing the tread pattern design, we also reinforced the carcass of the tire.

Continental: Did you gain any special, unexpected insights during the development process and would you say that your work will benefit from this going forward?

Anuj Jain: Of course, challenging projects like this help us improve our tire development skills. And there is more to this than new findings and solutions that will boost future tire performance. At every stage of the development journey we also refined our processes, our organizational structures and our teamwork, all of which are key success factors for Continental. We can definitely put this experience to good use in our future endeavors.

Continental: To finish, let’s shift the focus to you personally: How excited are you about the start of the first stage of Extreme E in Senegal and the moment when you get to see your product in action in an actual race?

Anuj Jain: I can’t wait to see the first season kick off in 2021. It will be really a proud moment for all the team members who have invested so much expertise and hard work in the development of the tire. I’d like to thank all the project team members for their constant support each step of the way. Extreme E will show the world that Continental is capable of handling even the most exceptional challenges when it comes to tires.

Continental: Thank you talking with us, Anuj.

Klaus Engelhart
Klaus Engelhart

Press Spokesman Passenger Car Tires Germany

Büttnerstrasse 25

30165 Hanover, Germany

+49 (0) 511 938 2285

+49 (0) 511 938 2455

More about Extreme E